Raptor™ Davit Arm, 1000mm (L) 2500mm (H)

Unit weights

• Boom: 15kg

• Brace: 9kg

Specifications

Materials

• Arm and mast: manufactured from high grade structural aluminium

• Connection brackets, end caps, supports: powder coated stainless steel

• Davit base: G350 grade steel, galvanised finish

Fixings (refer to installation manual)

Epoxy Adhesive

• Stainless or HDG M16 x 180mm allthread stud fixing for 1000mm reach OH510 davit range, min 120mm embedment. Requires 18mm hole size.

• Stainless M16 x 200mm allthread stud fixing for 1400mm reach OH514 davit range, min 140mm embedment - requires 18mm hole size

• Recommended epoxy adhesive: SD944E (EF500R+)

Cast-in

AP160 cage bolt kit or OH522 flush mount base

• Minimum concrete thickness: AP160: 220mm, OH522: 300mm

• Minimum concrete strength: 32Mpa

Weight

• OH510.1600: 41kg total weight (excluding base)

• OH510.2200: 48kg total weight (excluding base

Substructure requirements

• Minimum concrete thickness:

• OH510 epoxy adhesive fix: 200mm

• OH514 epoxy adhesive fix: 220mm

• AP160 cast-in cage bolt kit: 220mm

• OH522 flush mount cast-in base: 300mm

• Minimum concrete strength: minimum 32 mPa

• Concrete may need to be verified by engineer regarding reaction loads

• Minimum 250mm edge distance

Rating

• 12kN single person use + rescue

• 400kg safe working load

Compliance

Kattsafe davits are designed to conform to requirements of Australian & New Zealand Standards AS/NZS 5532:2013, AS/NZS ISO 22846, AS/NZS 1891 and relevant statutory codes of practice and guidelines

Testing

Testing and performance based on requirements of Australian & New Zealand Standards AS/NZS 1891 and AS/NZS 5532.

• Dynamic load test: 15kN

• Static load test: 12kN

Product Warranty

10 years from the date of purchase subject to correct installation. Use and maintenance to be in accordance with manufacturer's specifications and recommendations. (This excludes wearing parts).

Inspection & maintenance

Inspection and certification required every 12 months by competent person in accordance with manufacturer’s specifications and requirements of Australian Standards AS/NZS 1891 and AS/NZS 5532 (refer installation manual).

Important notes

Failure to supply and/or install the proprietary product in accordance with above standards and codes, specifications and instructions voids complete system certificate and/or warranty.